Vintage Two-Man & One-Man Crosscut Saw Reference Guide: Simonds Mfg. Co.

The following is a reference guide for Simonds Mfg. Co. crosscut saws, which are well known for their quality and superiority. The guide is not complete but covers 65+ crosscut saws, and 10+ handles.

Vintage Crosscut Saws: Simonds Mfg. Co.

Both two-man and one-man crosscut saws are included in this list.

For a larger view of the saw blade, click on the image thumbnail.


No. 11

Simonds No 011

Simonds Crescent Ground

Reference(s):


No. 12

Simonds No 012

Simonds Crescent Ground

Two Cutting Teeth to each Raker.

Reference(s):


No. 13

Simonds No 013

Simonds Crescent Ground

Two Cutting Teeth to each Raker. Like No. 12 Saw except that teeth are coarser.

No. 13. Wide pattern gives extra weight for fast cutting in large diameter hard timber. Wide plate alo assures a straight cut.

Reference(s):


No. 22

Simonds No 022

Simonds Crescent Ground

Perforated Lance Tooth. Four Cutters to each Raker.

No. 22. Wide pattern log saw for large virgin timber.

Reference(s):


No. 33

Simonds No 033

Simonds Crescent Ground

Three Cutting Teeth to each Raker.

Reference(s):


No. 44

Simonds No 044

Simonds Crescent Ground

Roomy gullet between each set of 3 teeth that readily carries the sawdust from the cut.

Reference(s):


No. 55

Simonds No 055

Simonds Crescent Ground

Roomy gullet between each set of 2 teeth.

Reference(s):


No. 66

Simonds No 066

Simonds Crescent Ground

Two Lance Teeth to each Raker.

Reference(s):


No. 77

Simonds No 077

Simonds Crescent Ground

Regular Peg Tooth.

Reference(s):


No. 111

Simonds No 111

Simonds Taper Ground, Simonds Brand (One Man)

Straight Taper Ground. Tuttle Tooth.

No. 111. General utility one-mam saw. Small tooth enables it to be used in trimming small branches, as well ms cutting fairly good sized trees.

Reference(s):


No. 112

Simonds No 112

Simonds Brand (One Man)

Two slim cutting Teeth and Raker. Sway Back. Straight Taper Ground.

Reference(s):


No. 113

Simonds No 113

Simonds Crescent Ground, Felling

Two Cutting Teeth to each Raker.

No. 113. Medium-wide sway—back pattern. A fast cutting saw in medium or small size hardwood where a narrow plate is an advantage. Highly tempered to stay sharp longer in frozen timber.

Reference(s):


No. 115

Simonds No 115

Simonds Crescent Ground

Two Cutting Teeth to each Raker.

Reference(s):


No. 133

Simonds No 133

Simonds Crescent Ground, Felling

Four Perforated Lance Teeth to each Raker. 14 x 19 gauge.

No. 133 Crescent Ground. Radius of cutting edge is designed to handle large or small timber with a natural, easy stroke. This saw has plenty of weight for large diameter logs, yet is narrow enough to be practical in second growth.

Reference(s):


No. 200

Simonds No 200

Simonds Taper Ground, Simonds Brand, Two Cutting Teeth to Each Raker

5 gauges taper.

No. 200 Medium wide pattern. Taper ground five gauges thinner on the back than on the cutting edge.

Reference(s):


No. 202

Simonds No 202

Simonds Taper Ground, Simonds Brand, Perforated Lance Tooth

5 gauges taper.

No. 202 Medium-wide saw. Five gauges taper.

Reference(s):


No. 203

Simonds No 203

Bay State

14 X 18 gauge

Reference(s):


No. 204

Simonds No 204

Bay State

14 X 18 gauge

Reference(s):


No. 205

Simonds No 205

Simonds Brand, Bay State

14 X 18 gauge

Reference(s):


No. 206

Simonds No 206

Simonds Brand, Bay State

14 X 18 gauge

Reference(s):


No. 207

Simonds No 207

Simonds Brand, Bay State

14 X 18 gauge

Reference(s):


No. 208

Simonds No 208

Bay State

14 X 18 gauge

Reference(s):


No. 210

Simonds No 210

Bay State Brand, Hollow Back, Two Cutting Teeth to Each Raker

No. 210. Hollow-back pattern. A good, light saw.

Reference(s):


No. 211

Simonds No 211

Bay State, Hollow Back

Reference(s):


No. 212

Simonds No 212

Bay State, Hollow Back

Reference(s):


No. 213

Simonds No 213

Bay State Brand, Hollow Back

Reference(s):


No. 214

Simonds No 214

Simonds Taper Ground, Simonds Brand, Perforated Lance Tooth, Bay State, Hollow Back

No. 214. Same as No. 0214, but flat ground.

Reference(s):


No. 0214

Simonds No 0214

Simonds Taper Ground, Simonds Brand, Perforated Lance Tooth

No. 0214 same as No. 214 except that No. 0214 is 2 gauge taper.

No. 0214. Hollow back pattern. A narrow, light saw. Works well in small soft timber. Tapered two gauges.

Reference(s):


No. 216

Simonds No 216

Bay State, Hollow Back

Reference(s):


No. 221

Simonds No 221

Simonds Crescent Ground (One Man), Two Cutting Teeth to Each Raker

Made with tooth best for cutting hard timber. Tilted supplementary handle makes pushing and pulling easier and does not tire the sawyer’s wrists. Three holes three inches apart permit adjusting the supplementary handle to a long or short arm man. An even gauge all along the circle of the cutting edge. Every tooth and raker works right.

No. 221. For hard and frozen timber.

Reference(s):


No. 222

Simonds No 222

Simonds Taper Ground, Simonds Brand (One Man), Perforated Lance Tooth

Straight Taper Ground. Lance Tooth.

No. 222. For cutting large logs. Has the same gullet room as narrow two-man saw. Particularly suited for cutting soft wood.

Reference(s):


No. 223

Simonds No 223

Simonds Crescent Ground (One Man)

"Crescent Ground" Lance Tooth One Man Saw. Accurately tapered from cutting edge to back. An even gauge all along the tooth edge. It cuts easy and saws fast. Double-horn handle with large opening, enabling operator to use mitten or glove in winter.

No. 223. Has extra gullet room for cutting medium hard timber. Large hand hole in handle permits sawing with mitten or glove in cold weather.

Reference(s):


No. 224

Simonds No 224

Simonds Brand (One Man)

Sway Back. Straight Taper Ground.

Reference(s):


No. 225

Simonds No 225

Simonds Crescent Ground

Lance Tooth.

Reference(s):


No. 227

Simonds No 227

Simonds Taper Ground, Special Mine Temper

The No. 227 One-man Cross~cut Saw has full length tapered lance teeth with spacing especially adapted for ease in cutting rough or sawn timbers such as used in mines. Fitted with metal handle only. The steel is of special mine temper to permit extreme set where necessary in cutting wet, water-soaked timbers.

Reference(s):


No. 231

Simonds No 231

Bay State Brand, One-Man

Reference(s):


No. 233

Simonds No 233

Bay State Brand, One-Man

Reference(s):


No. 237

Simonds No 237

Simonds Brand (One Man)

Lance Tooth. Sway Back. Straight Taper Ground.

Reference(s):


No. 238

Simonds No 238

Simonds Brand (One Man)

Chinook Tooth. Sway Back. Straight Taper Ground.

Reference(s):


No. 248

Simonds No 248

Bay State, Australian Pattern

"M" Tooth.

Reference(s):


No. 315

Simonds No 315

Simonds Crescent Ground, Felling

Two Coarse Cutting Teeth to each Raker.

No. 315. Narrow sway-back pattern suitable for cutting small diameter hardwood. Narrow plate leaves extra room to use a wedge even in small cuts if necessary.

Reference(s):


No. 316

Simonds No 316

Simonds Crescent Ground, Cottonwood Pattern

Two Cutting Teeth to each Raker.

Reference(s):


No. 324

Simonds No 324

Simonds Crescent Ground, Cottonwood Pattern, Perforated Lance Tooth

Lance Tooth. Four Cutting Teeth to each Raker.

No. 324. Medium-wide, straight-back pattern has a somewhat flatter radius on cutting edge than the No. 22. This is a heavy gauge saw especially suited to large-butted swamp-grown timber.

Reference(s):


No. 325

Simonds No 325

Simonds Crescent Ground, Felling

Lance Tooth. Four Cutting Teeth to each Raker.

No. 325 Crescent Ground. For pulpwood and small logs.

Reference(s):


No. 326

Simonds No 326

Simonds Crescent Ground, Cottonwood Pattern

Two Cutting Teeth to each Raker.

Reference(s):


No. 375

Simonds No 375

Simonds Crescent Ground, Australian Trade

Australian Sleeper Cutter Saw. Specially ground for Sleeper Cutting.

Reference(s):


No. 376

Simonds No 376

Simonds Crescent Ground, Australian Trade

Australian Diamond Point Saw.

Reference(s):


No. 377

Simonds No 377

Simonds Crescent Ground, Australian Trade

Regular Peg Tooth Saw.

Reference(s):


No. 378

Simonds No 378

Simonds Crescent Ground, Australian Trade

"M" Tooth.

Reference(s):


No. 381

Simonds No 381

Simonds Crescent Ground, Australian Trade

Australian Sleeper Cutter.

Reference(s):


No. 383

Simonds No 383

Simonds Crescent Ground, Australian Trade

Australian Faller's Saw, "M" Tooth and Raker.

Reference(s):


No. 384

Simonds No 384

Simonds Crescent Ground, Australian Trade

Australian Faller’s Saw.

Reference(s):


No. 444

Simonds No 444

Simonds Brand (One Man)

Straight Taper Ground.

Reference(s):


No. 500

Simonds No 500

Crescent Ground, Pacific Coast Pattern

Regular Pattern.

Reference(s):


No. 503

Simonds No 503

Simonds Crescent Ground, Pacific Cost Pattern

Royal Chinook. Bucking Pattern.

No. 503 Bucking. For years the standard bucking saw in fir, spruce and hemlock on the Pacific Coast. This saw is made especially stiff to eliminate vibration at the free end when bucking on side hills in rough country. Backs carefully dressed off to assure smooth running when undercutting.

Reference(s):


No. 506

Simonds No 506

Crescent Ground, Pacific Coast Pattern

Sequoia Chief. Bucking Pattern.

Reference(s):


No. 510

Simonds No 510

Crescent Ground, Pacific Coast Pattern

Falling Pattern. Sway Back

Reference(s):


No. 513

Simonds No 513

Simonds Crescent Ground, Pacific Coast Pattern

Royal Chinook. Falling Pattern

No. 513 Falling. Specially developed for falling in Pacific Coast timber.

Reference(s):


No. 516

Simonds No 516

Crescent Ground, Pacific Coast Pattern

Sequoia Chief. Falling Pattern.

Reference(s):


No. 519

Simonds No 519

Simonds Taper Ground

No. 519. Especially designed for cutting trees, poles and small timber.

Reference(s):


No. 520

Simonds No 520

Simonds Taper Ground, Bucking, Pacific Coast Pattern

Chinook.

No. 520 Bucking. For contractors and ranchers. Especially adapted for use in all types of construction work, particularly for trimming piling and timbers in shipyards, bridge work and similar Work. A general utility saw.

Reference(s):


No. 521

Simonds No 521

Pacific Coast Pattern

Eclipse

Reference(s):


No. 522

Simonds No 522

Crescent Ground, Pacific Coast Pattern

Hoo Hoo.

Reference(s):


No. 530

Simonds No 530

Pacific Coast Pattern

Webfoot.

Reference(s):


No. 531

Simonds No 531

Pacific Coast Pattern

Webfoot Pattern Peg Tooth (Tenon Saw).

Reference(s):


No. 541

Simonds No 541

Simonds Crescent Ground, Falling

No. 541 Falling. This is a special pattern and special temper for falling and double bucking in pine and fir stands east of the mountains in the Northwest.

Reference(s):


No. 777

Simonds No 777

Simonds Brand (One Man)

Straight Taper Ground. Straight Back. Peg Tooth.

Reference(s):


Other Known Vintage Crosscut Saws: Simonds Mfg. Co.

The following are crosscut saws that were mentioned in the tool catalogs, but were not illustrated. They are variants of known models of crosscut saws.


Cross-cut Saw Specifications: Simonds Mfg. Co.


Vintage Crosscut Saw Handles: Simonds Mfg. Co.

The following are the handles for Simonds Mfg. Co. Two-Man crosscut saws and One-Man crosscut saws.

Two-Man Crosscut Saw Handles

One-Man Crosscut Saw Handles


Source: Simonds Mfg. Co. - Tool Catalogs

The following tool catalogs were researched to make this reference guide.

Related Item(s):